|
 |
Features
- DPDS limit switch for multiple applications
- Rugged aluminum alloy diecast housing
- High mechanical strength
- Oil resistance,waterproof and dustproof structure
Ratings
|
Rated
voltage |
Noninductive Load (A) |
nductive Load (A)
|
|
Resistance Load
|
Lamp Load
|
Inductive Load
|
Motor Load
|
|
NC |
NO |
NC |
NO |
NC |
NO |
NC |
NO |
|
125VAC
250VAC |
5(0.1)
3 |
1.5
1 |
0.7
0.5 |
3
2 |
2.5
1.5 |
1.3
0.8 |
8VDC
14VDC
30VDC
125VDC
250VDC
|
5(0.1)
5(0.1)
4(0.1)
0.4
0.2
|
2
2
2
0.05
0.03
|
5
4
3
0.4
0.2
|
4
4
3
0.4
0.2
|
3
3
3
0.05
0.03 |
Characteristics
| Rating |
5A 125V,3A 250VAC |
| Operation speed |
1mm~1m/s |
Operating frequency |
Mechanical:120 operations/min.Electrical:30 operations/min. |
Contact resistance |
15m max.(initial) |
IInsulation resistance |
100m min. (at 500VDC) |
| Dielectric strength |
1000VAC, 50/60 Hz for 1 minute between terminals of the same polarity |
| 1500VAC, 50/60 Hz for 1 minute between current-carrying and non-current-carrying metal parts |
1500VAC, 50/60 Hz for 1 minute between each terminal and ground |
| Vibration |
110 to 55HZ,1.5mm double amplitude |
| Shock |
Mechanical:Approx.1000m/s2(Appprox.100G'S)
Electrical:Approx.500m/s2(Approx.50G'S) |
| Ambient temperature |
-10~+70 |
| Humidity |
<95% RH |
| Life |
Mechanical: 10,000,000 operations/min.
Electrical: 200,000 operations/min. |
| Weight |
Approx.360g(cable length 3m) Approx.540g(cable length 5m) |
| Degree of protection |
IP67 |
Operating Characteristics
|
Models |
EC-3101 |
EC-3102 |
EC-3103 |
EC-3104 |
EC-3110 |
EC-3111 |
EC-3112 |
EC-3113 |
EC-3169 |
|
OF(Max.) |
1200gf(11.77N) |
1200gf(11.77N) |
1200gf(11.77N) |
580gf(5.69N) |
1200gf(11.77N) |
1800gf(17.65N) |
1800gf(17.65N) |
1800gf(17.65N) |
150gf(1.47N) |
|
RF(Min.) |
450gf(4.41N) |
450gf(4.41N) |
450gf(4.41N) |
150gf(1.47N) |
450gf(4.41N) |
450gf(4.41N) |
450gf(4.41N) |
450gf(4.41N) |
- |
|
PT(Max.) |
1.8mm |
1.8mm |
1.8mm |
25 |
1.8mm |
1.8mm |
1.8mm |
1.8mm |
15 |
|
OT(Min.) |
3mm |
3mm |
3mm |
40 |
3mm |
3mm |
3mm |
3mm |
- |
|
MD(Max.) |
0.2mm |
0.2mm |
0.2mm |
3 |
0.2mm |
0.2mm |
0.2mm |
0.2mm |
- |
|
OP |
15.7+-1mm |
28.5+-1mm |
28.5+-1mm |
- |
28.5+-1mm |
24.9+-1mm |
34.3+-1mm |
34.3+-1mm |
- |
|
Fastening of the switch cable
The switch bodies are filled with resin for sealing purposes. To avoid stressing the cable and switch body, fasten the switch at 5 cm or farther away from the switch body, should the wire be bent, the bending radius shall be at least 45mm. |
Switch bank mounting
A maximum of six switches may be mounted together as a switch bank. During the installation,the convex part of the switch back.The mounting panel shall be 6mm or thicker. |
 |
 |
|
Installation The service life and accuracy of switches will be effected by the shape of actuator operation frequency & over travel. So the angular of the fixing level should be about 30, the surface finish of the fixing level should be over, the hardness is from HV400~500.When installing, the position of the concave part should be above the standard panel |
Installation
Recommended tightening torque according to the follwing form.
|
Model |
Screw type |
Torque |
|
1 |
M5 fastening screws
|
43.4~52lb.in
(50~60kgf.cm) |
|
2 |
M3.5 installing screws
|
6.9~7.9lb.in
(8~9kgf.cm) | |
 |
|
|
Contact types  |
Contact types
Mount the switch body to a rigid mounting panel using two M5 screws.
 |
|
